Model: ZC-R40-4125 | RS-232: 2 |
CPU: J4125 | RS-485: N/A |
RAM: 1*SO DIMM DDR4 | USB: 4 |
Storage: 1*mSATA,1*SATA | Display: VGA |
LAN: 4*Gigabit Intel i225 | Cooling: FAN |
ZC-R40-4125 Thin Mini Itx Motherboard Onboard 4*Intel i225 2.5 Gigabit Network Network Router J4125 CPU Quad Core 2.0GHz,Optional full Gemini Lake-R CPUS,1*mSATA+1*SATA Storage,1*mPCIE+1*M.2 Slots
Main Features:
1.) Network Router Motherboard Integrated Intel Celeron J4125 2.0GHz, Optional all Intel Gemini Lake-R CPUs
2.) Support 2400MHz DDR4 memory/1.2V memory Network Router Motherboard
3.) Network Router Motherboard Display supports VGA and HDMI display, HDMI display is optional
4.) It supports 4 Intel i225V or i226 2.5 Gigabit networks Network Router Motherboard
5.) Network Router Motherboard With 1 Mini-PCIe (4G, optional WIFI), 1 M.2 KeyB (5G) and 1 MSATA
6.) Support 2 USB3.0 and 4 USB2.0 interfaces Network Router Motherboard
7.) Network Router Motherboard With 2 RS232 serial ports, 2 RS485 serial ports (Optional)
8.) Support -20~60 degrees wide temperature work Network Router Motherboard
9.) Network Router Motherboard Support AT and ATX mode switching, 12V DC power supply
ZC-R40-4125 Mini Itx Motherboard with 4 Intel 2.5 Gigabit Network Card
Processor | Integrated Intel Celeron J4125 2.0GHz quad-core processor, TDP 10W |
Optional with the full range of Intel Gemini Lake-R CPUs | |
RAM | 1* SODIMM 2400MHz DDR4,Max 8GB |
Display | Integrated Intel UHD Graphics 600 Core Graphics |
1*VGA port, 1*HDMI port (Optional) | |
Network | 4* Intel i225 or i226 2.5 Gigabit network interface (Optional 2 sets of BYPASS function), Support wake on LAN/PXE |
Storage | 1* MSATA 3 .0 slot (either or 7PIN SATA interface,default is MSATA) |
1* 2.5'' SATA 3.0 Interface (Optional, either or 7PIN SATA interface) | |
1* SATA 3.0 Interface (default,either or 1*2.5'' SATA Interface ) | |
Expand | 1* Mini-PCIe Slot (Support full and half size WIFI/4G Module;only supports 4G when 3rd and 4th Network cards need to be supported) |
1* M.2 Slot (Support 5G) | |
Rear I/O Interface | 4* RJ45 |
2* USB3.0 | |
1* CISCO standard RS232 | |
1* Power On/Off Button | |
1* Clear CMOS button (optional) | |
1* HDD/Power LED | |
1* 12V DC power input interface | |
Front I/O Interface | 1* HDMI (Optional) |
2* USB 2.0 (Optional, and ethier or USB2.0 2*4Pin interface) | |
4* Network LED Indicator | |
1* HDD/Power LED | |
Inside I/O Interface | 1* JVGA 1*12Pin |
1* USB 2.0 vertical standard interface (Optional 2 USB2.0 interfaces 2*5Pin) | |
2*USB 2.0 2*5Pin | |
1* COM port 2*5Pin (Optional) | |
2* RS485 2*3Pin (Optional, COM3 and COM4 support RS485) | |
1* Network indicator 2*8Pin | |
1* HDD power supply 1*4Pin | |
1* 4pin ATX power interface (can be used as 12V input and output power interface) | |
1* Front panel switch button and indicator port 2*5Pin | |
Fan Interface | Fanless Cooling Design Reserved 1*4pin CPU fan interface, Reserved 1*4pin system fan interface |
GPIO | Support 4 input and output GPIO |
BIOS | 64Mb Flash ROM |
Watchdog | Support hardware reset function (256 levels, 0~255 seconds) |
Operating System | Windows 10/Linux/ROS/Love Fast |
Power Supply | DC12V |
Operating Temp | -20℃~60℃ |
Storage Temp | -20℃~70℃ |
Working Humidity | 5%-95% relative humidity, non-condensing |
Size | 170mm x 170mm |